Logo  
 中文    

   

  • Home
  • R900A17CO1 - Wireless 3 x Water Leak Detector with 1 x Digital Output

Image

Click on above image to view full picture

R900A17CO1 - Wireless 3 x Water Leak Detector with 1 x Digital Output

   

The R900A17CO1 series devices are Class A three-channel water leakage alarm devices. The devices are equipped with a built-in vibration sensor for tamper detection and one DO output.

When a water leakage threshold alarm is triggered, the DO output can be used for local linkage to control third-party DI devices for interlocking operations.

With up to 7 flexible installation options, R900A17CO1 integrates easily into various environments.

In addition, with support for Netvox NFC app, users can easily configure settings, update firmware, and access data simply by tapping their smart phone to the device.

Be the first to review this product

The R900A17CO1 series devices are Class A three-channel water leakage alarm devices. The devices are equipped with a built-in vibration sensor for tamper detection and one DO output.

When a water leakage threshold alarm is triggered, the DO output can be used for local linkage to control third-party DI devices for interlocking operations.

With up to 7 flexible installation options, R900A17CO1 integrates easily into various environments.

In addition, with support for Netvox NFC app, users can easily configure settings, update firmware, and access data simply by tapping their smart phone to the device.

• Three point-type water leakage detection
• Powered by 2* 3.6V ER18505 batteries (also support ER14505 batteries with battery converter case)
• Main unit: IP65
• Support magnetic switch to turn on/off and factory reset device
• Up to 7 installation methods for different kinds of scenarios
• Report when device disconnects from the network
• Support NFC. Configure and upgrade firmware on Netvox NFC app
• Store up to 10000 data
• Offline data retransmission function
• LoRaWANTM Class A compatible
• Frequency hopping spread spectrum
• Configuration parameters can be configured through third-party software platforms, data can be read, and alarms can be set via SMS text and email (optional)
• Applicable to the third-party platforms: Actility / ThingPark, TTN, MyDevices / Cayenne
• Low power consumption and longer battery life

Electric:

Input Power

2 * ER18505 (3.6V)
also support ER14505 batteries with battery converter case

Battery Low Voltage Alarm

3.2V

Battery Measurement Accuracy

0.1V

Sensor Cable length

1000 mm

Digital Out Voltage

3.3V

Digital Out Cable length

1000 mm

Frequency:

Frequency Range

863MHz-928MHz 470MHz-510MHz

TX Power

US915 22dbm；
AS923 16dbm；
AU915 22dbm；
CN470 19.15dbm；
EU868 16dbm；
KR920 14dbm；
IN865 20dbm

Receiving Sensitivity

–123 dBm for 2-FSK (at 1.2 Kbit/s),
–148 dBm for LoRa® (at 10.4 kHz, SF=12)

Antenna Type

Built-in antenna

Communication Distance

Up to 10 km
(visible linear obstacle-free transmission distance , actual transmission distance depends on the environment )

Data Transfer Rate

FSK: 0.6 – 300Kbit/s
LoRa: 0.018 – 62.5Kbit/s

Modulation

LoRa/FSK (Note: You can choose one of them)

Supportable LoRaWAN Band

EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,
IN865-867,CN470-510

(Note: The frequency band is optional and needs to be configured before shipment)


Physical:
Dimension

Host body:115.5mm x W: 60mm x H: 54mm

Operating Temperature

-20°C ~ 55°C
Storage Temperature

-40°C ~ 85°C

Operating Humidity Range

<90%RH (No condensation)

Installation

Standard: screws, double-sided tape, bracket
Prepared by Customer: cable ties
Optional: DIN rail, magnetic, swivel bracket