Logo  
 中文    

   

  • Home
  • R718N125E Wireless Single-Phase Current Meter with 1 x Detachable 250A Clamp-On CT

Image

Click on above image to view full picture

R718N125E Wireless Single-Phase Current Meter with 1 x Detachable 250A Clamp-On CT

   

The Netvox wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by batteries and obtains the load AC value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.

Be the first to review this product

The Netvox wireless single-phase current detector is used to detect single-phase electrical input current. The device is compatible with the LoRaWAN protocol and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by batteries and obtains the load AC value through the current transformer. The device adopts the clamp-on current transformer, which can be conveniently connected to the measuring device.

• Clamp-on current transformer with detachable cable
• SX1276 wireless communication module
• 2 ER14505 batteries AA size in parallel(AA size 3.6V for each battery)
• Main body: IP53; Sensor: IP30
• Magnetic base
• LoRaWAN™ Class A compatible
• Frequency Hopping Spread Spectrum (FHSS)
• Available third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne
• Low power consumption and long battery life

Electric:

Power Supply

2 ER14505 AA size lithium batteries (3.6V 2400mah for each one)

Battery Life

5 years
(when ambient temperature: 25 ℃, report once every 30mins,
txpower = 20dBm, LoRa spreading factor SF = 10)

Standby Current

25uA

Wakeup Current

7mA

RF Receiving Current

11 mA / 3.3V

RF Emission Current

127 mA / 3.3 V

Battery Measurement Accuracy

± 0.1V

Current Measurement Accuracy

<±1%

Current Resolution

1mA

Current Measurement Range

1A – 250A (depending on the current transformer configuration)

Clamp-On CT Rated Primary Current

200A, 50Hz – 60Hz

Clamp-On CT Rated Secondary Current

66.66mA

Clamp-On CT Saturation Current

≥250A

Clamp-On CT Ratio

3000: 1

Clamp-On CT Load Resistance

10Ω

Clamp-On CT Accuracy

1% (1A –250A)

Clamp-On CT Electrical Strength

3000V

Clamp-On CT Case Material

Flame Retardant Grade 94-V0 UL Material

Clamp-On CT Environmentally Friendly

ROHS compliant

Clamp-On CT Operating Temperature

-40 ℃ – 85 ℃

Frequency:

Frequency Range

863MHz-928MHz 470MHz-510MHz

Power Output

19dBm±1dBm (max)

TX Power

US915 20dbm
AS923 16dbm
AU915 20dbm
CN470 19.15dbm
EU868 16dbm
KR920 14dbm
IN865 20dbm

Receiving Sensitivity

-136dBm（LoRa, Spreading Factor=12，Bit Rate=293bps )；
-121dBm (FSK, Frequency deviation=5kHz, Bit Rate=1.2kbps)

Antenna Type

Built-in antenna

Communication Distance

10 km (line of sight)
(Note: The actual transmission distance depends on the environment.)

Data Transfer Rate

LoRa: 0.3kbps – 50kbps
FSK: 1.2kbps – 300kbps

Modulation

LoRa/FSK (Note: One modulation method is required.)

Available LoRaWAN Band

EU863-870, US902-928, AU915-928, KR920-923, AS923-1, AS923-2, AS923-3,
IN865-867, CN470-510

(Note: optional, to be configured before shipment)


Physical:
Dimensions

Main body:112mm (L) x 88.19mm (W) x 32mm (H)
Sensor: 46mm (L) x 34mm (W) x 66mm (H)

Main body Weight

About 141g
Sensor Weight

About 150.6g

Sensor External Wiring Length

Detachable cable: about 1200mm

Ambient Temperature Range

-20°C – 55 °C
Storage Temperature Range

-40°C – 85°C

Ambient Humidity Range

<90%RH (No condensation)

Mounting

Screw / Magnet