Logo  
 中文    

   

  • Home
  • R313CB-Wireless Window Sensor with Glass Break Detector

Image

Click on above image to view full picture

R313CB-Wireless Window Sensor with Glass Break Detector

   

R313CB is a switch detection device which is the Class A device of Netvox based on LoRaWANTM protocol. It is compatible with the LoRaWAN protocol. When the doors and windows are abnormally opened or the glass of the doors and windows are broken, R313CB will send a message to the gateway. It can be installed on the door or window with two glass sliding sashes. The reed switch and the magnet of the main body are respectively installed on both sides of the window sashes. The external reed switch and the magnet can be installed on both sides of another window sashes, and the glass sensor can be pasted on the glass.

Be the first to review this product

R313CB is a switch detection device which is the Class A device of Netvox based on LoRaWANTM protocol. It is compatible with the LoRaWAN protocol. When the doors and windows are abnormally opened or the glass of the doors and windows are broken, R313CB will send a message to the gateway. It can be installed on the door or window with two glass sliding sashes. The reed switch and the magnet of the main body are respectively installed on both sides of the window sashes. The external reed switch and the magnet can be installed on both sides of another window sashes, and the glass sensor can be pasted on the glass.

• Adopt SX1276 wireless communication module
• 2 x 3.0V CR2450 button batteries
• Reed switch and glass break detection
• Compatible with LoRaWAN™ Class A
• Frequency Hopping Spread Spectrum (FHSS)
• Configuration parameters can be configured through a third-party software platform
• Applicable to third-party platforms: Actility / ThingPark, TTN, MyDevices / Cayenne
• Low power consumption and long battery life Improved

Electric:

Power Supply

2 x 3.0V CR2450 button batteries

Operation Voltage

DC 2.4V to 3.0V

Standby Current

15µA / 3V

Transmitting Current (max)

120mA / 3.0V

Receiving Current (max)

11mA/ 3.0V

Battery Measurement Accuracy

± 0.1V

Low Voltage Threshold

2.4V

Sensor Characteristic

Within the magnetic range, it is at off state (conducting). When out of the magnetic range, it is at on state (non-conducting).

Frequency:

Frequency Range

863MHz-928MHz 470MHz-510MHz

TX Power

US915 20dbm；
AS923 16dbm；
AU915 20dbm；
CN470 19.15dbm；
EU868 16dbm；
KR920 14dbm；
IN865 20dbm；

Receiving Sensitivity

-136dBm（LoRa，Spreading Factor=12，Bit Rate=293bps )；
-121dBm (FSK,Frequency deviation=5kHz, Bit Rate=1.2kbps)

Antenna Type

External antenna

Communication Distance

Up to 10 km
(visible linear obstacle-free transmission distance , actual transmission distance depends on the environment )

Data Transfer Rate

LoRa: 0.3kbps～50kbps
FSK: 1.2kbps～300kbps

Modulation

LoRa/FSK (Note: You can choose one of them)

Supportable LoRaWAN Band

EU863-870,US902-928,AU915-928,KR920-923,AS923-1,AS923-2,AS923-3,
IN865-867,CN470-510

(Note: The frequency band is optional and needs to be configured before shipment)


Physical:
Dimension

57mm x 38.05mm x 15.2mm
Operating Temperature Range

-20°C ~ 55°C

Storage Temperature Range

-40°C ~ 85°C

Operating Humidity Range

<90%RH (No condensation)